Product Name:
M6000-1002450A Belt Tensioner ,Yuchai Engie / Yutong Bus,Matching For Original Factory .
Material: ALUMINUM
Product Details:
| Product Name | Belt Tensioner |
| Oem No. | M6000-1002450A |
| Truck Model | Yutong |
| Engine Model | Yuchai Engine |
| Material | Aluminum |
| Specification: | Based on customer |
| Payment | T/T,L/C ,Western Union
|
Tensioning wheel working principle:
The tensioning wheel releases the torque of the pre-tightened plane vortex spring or cylinder torsional spring in the process of working to achieve the purpose of automatically tensioning the accessory belt.
Specification for installation of automatic tensioning wheel:
1, scope,
This specification is applicable to the operation of the automatic tensioning wheel Assembly during installation.
2. Installation steps of abnormal tensioning wheel:
(1)Install and fix the tensioning wheel with M10 countersunk bolt;
(2)The recommended tightening torque of the bolt is :(50±5)N m;
(3) Use a spanner to pull the tensioning wheel arm to the maximum corner;
(4) in a reasonable order will be around the belt pulley, and maintain the correct position;
(5)Slowly loosen the tensioning wheel arm and make it tighten the belt.Pull out the spanner;
The diagram below:
3. Installation steps of the same direction tensioning wheel:
(1) Install and fix the tensioning wheel with M10 flange face bolts;
The tightening torque of the bolt is recommended to be 50±5N m;
(3) Use the square hole spanner to pull the tensioning wheel arm to the maximum corner;
(4) in a reasonable order will be around the belt pulley, and maintain the correct position;
(5)Slowly loosen the tensioning wheel arm and make it tighten the belt.Pull out the spanner. OK.
The diagram below:
4,Points to note during installation of tensioning wheel:
(1) The belt wedge must be in the corresponding slot of the belt pulley;
(2) Check whether the positioning block of the tensioning wheel arm is close to the free position after tensioning the belt. If it is at a small Angle close to the free position, please replace the belt.
(3)When the tensioning wheel is disassembled, follow the steps.
FAQ:
Q : When can I get the price?
A : We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us by E-mail,so that we will regard your inquiry as the first priority.
Q : How can I get a sample to check your quality?
A :After price confirmation, you can require for samples to check our quality.
Q : Can you do the design for us?
A :Yes. We have a professional team with rich experience in packaging box design and manufacturing. We can manufacture the products as per your requirements.
Q : How long can I expect to get the sample?
A :It will be ready for delivery in 7-10 days. The samples will be sent to you via express and arrive in 3-5 days.
Q : What about the lead time for mass production?
A :Usually 30-45 days after you confirm the PP sample and we received your deposit.
Product Tags:
|
|
M6000-1002450A Belt Tensioner Images
|
